SYMBOLSINK CO., LIMITED

High quality products, professional services, has become the core supplier of ceramic sanitary ware industry!

Tel: 86-13696919243  E-mail:sale@symbolsink.com
Home > News > Content

How To Install Vessel Bathroom Sinks

- Jun 17, 2017 -

Vessel bathroom sinks installation to pay attention to:

1. Confirm the installation position of the vessel bathroom sinks: before paving the floor tile and the wall brick, to confirm the installation of the above counter sinks, because the installation of bathroom cabinets is to punch holes in the wall, but also need to water holes and drainage holes, once installed after the general can not move the location, so confirm that the installation of a good white square vessel sink is the prerequisite for installation.

2. To purchase bathroom cabinets to confirm the shape and size of the vessel bathroom sinks according to the installation location: After the location of the bathroom cabinet is determined, the shape and size of the white square vessel sink can only be determined according to the location of the installation.

Vessel Bathroom Sinks

3. Look for the pipeline diagram and wiring diagram: The installation of the wall with punching drilling holes, so before the installation to confirm the pipeline diagram and line diagram is critical, if breaking the water pipe or wiring diagram will pry open part of the wall tiles, causing unnecessary loss.

4. Confirm the installation height of the vessel bathroom sinks: The standard installation height of the general bathroom cabinet is 8008, which is calculated from the top of the floor tile to the wash basin, and the specific installation height is determined according to the height of the family member and the usage habit, but it is most suitable in the standard altitude range.

5. The fittings and installation of each above counter sinks are different, that is, the size of the same type of punch (the dimension of the hole on the wall) is not the same, but the installation process is basically the same.