SYMBOLSINK CO., LIMITED

High quality products, professional services, has become the core supplier of ceramic sanitary ware industry!

Tel: 86-13696919243  E-mail:sale@symbolsink.com
Home > Sink Guide > Content

white rectangular vessel sink with faucet

- Jun 11, 2017 -

Rectangular vessel sink with faucet installation:

1. Before installing the faucet, we need to flush and wash the silt impurities in the water pipe, remove the sundries in the installation hole and check the accessories in the packing box. Do not mix impurities to avoid clogging or wear ceramic spool.

2. Use the metal hose to connect the water pipe, do not need to consider the installation position of the water pipe, but note that the length of the hose is usually

30cm (import size, individual brand or hard tube), with metal pipe connection pipe, you should first buy after the faucet, and then according to the length of the faucet pipe to lay pipe, of course, from the service life, the hard tube is better than the hose, the same, in the installation of rectangular vessel sink with faucettime, such as water pipe laying above the sink, then installed into the wall-type sink mixer is the best, on the contrary, the installation of common sink faucet.

3. The related accessories of the import faucet are different from the domestic faucet. The water pipe of the general inlet faucet has the soft and hard points, and the hose

(stainless steel braided pipe) at most, the active nut end has an imperial 3/8 inch, with its matching can only choose imported triangular valve, in addition, the water assembly pipe mouth is 11/4 inches.

4. When taking over, the left side is hot water, the right side is cold water, the two tubes are mm. The inlet joint position is fixed and then the faucet is removed.

To the wall surface muddy water after completion, and then install the faucet, lest the faucet surface coating is worn, scraping flowers. If the use of imported products such as flushing, the installation of booster pumps in advance to ensure normal effluent.