SYMBOLSINK CO., LIMITED

High quality products, professional services, has become the core supplier of ceramic sanitary ware industry!

Tel: 86-13696919243  E-mail:sale@symbolsink.com
Home > Sink Guide > Content

How to pick the right sink

- May 17, 2017 -

Although the sink is decorated in an accessory, but in all kinds of kitchen supplies, the use of the most frequent sinks. After meals, 65% of the time to deal with the sink, so it is self-evident to the importance of family life. At present, there are a variety of water tanks on the market, different materials have different characteristics, styles are not the same.

A look at stainless steel sink exterior

Stainless steel sink carefully observed, we can find, high-quality sink surface flat, visual gloss soft, easy to sticky oil, easy to clean, wear-resistant. The high-quality sink inside the corners close to 90 degrees, the sink inside the vision is bigger, the basin body volume is also big.

Square Bathroom Sinks Undermount

Second view stainless steel sink fittings

At the same time can observe the supporting parts of the sink: high-quality water head requirements wall thickness, smooth processing, the cage closed without leaking, touch bead durable and comfortable feeling. Downspouts Requirements for environmental protection disposable materials made, with easy installation, deodorant, heat, anti-aging and other functions, durable.

A water-going device may be something that most consumers ignore, but it is a very critical part of the sink configuration. The price impact on the sink is also very large, a good full stainless steel water-tank prices more than 100 yuan, and some sewage devices containing automatic water, but the function is not necessarily good, start convenient, long time may arise problems!

20170516_180205_007.jpg

Three gauge stainless steel sink ratio thickness

Good stainless steel sinks are using thick plates, high-quality sinks using imported 304 stainless steel plates, thickness of 1 mm, and ordinary low-grade trough using 0.5 mm ~0.7 mm. Because the sink has been the edge processing, it is difficult to see the thickness of a sudden, the simplest way: a little force on the surface of the sink, if pressed down, the material is very thin, of course, if can borrow vernier caliper and spiral micrometer do not be so troublesome.

The components of the four stainless steel sinks

Stainless steel is a kind of ferroalloy, the proportion of steel is 7.87, the addition of nickel, chromium heavy metals, the proportion of these metals are larger than steel, so heavier weight (of course, also to refer to the thickness of the plate). If it is fake, inferior stainless steel, such as the weight of chrome plated steel.

Undermount Vanity Sinks

Five than stainless steel sink process

There are welding method and one forming method. We see some brand-name sinks, the same exterior size, the price is very different. There are material factors in this, but also the cost of craft. Of course, it can be affirmed that the one-formed stainless steel sink material is definitely better than the welding method. Integrated molding technology solves the leakage problem caused by the corrosion of the weld of the pot body because of the welding of various chemical liquids (such as detergent, stainless steel detergent, etc.). Integrated molding process is a particularly important process, the steel plate material requirements are very high. What kind of process is a clear embodiment of flume quality.

At the same time, can turn the sink to look at its bottom, high-quality trough the bottom of the spray or sticky rubber sheet and do not fall off, can reduce the tap water impact on the sound of the bottom of the basin caused by buffering.